Filtration
Air filtration matched to the required air quality.
ALFACOM ENGINEERING LTD.
Compressed Air Equipment
Compressed air systems require equipment matched to the required air quality, operating pressure and consumer flow demand. Filtration, regulation and air treatment help match the supply to pneumatic equipment and process requirements.
Compressed Air Equipment · Illustrative image
THE PRODUCT RANGE
Explore the Range
Explore the equipment and selection topics below, then review the detailed catalogue for the selected product.
Review six air preparation series and push-in fitting guidance below, with ALFACOM-hosted technical catalogues.
Pressure Regulation
Regulation for pneumatic consumers and process requirements.
Air Treatment
Select equipment using flow, pressure and installation requirements.
TR Air Pressure Regulators
Regulators for setting the air pressure supplied to pneumatic equipment, with a gauge for local indication.
| Listed model | Connection |
|---|---|
| TR2000-02 | G 1/4 |
| TR4000-04 | G 1/2 |
| TR4000-06 | G 3/4 |
| TR5000-10 | G 1 |
Provide inlet pressure, required outlet pressure and air demand. Select using the exact model's flow and pressure characteristics.
Technical drawing and model data: page 2 of the shared air preparation catalogue.
TC Air Service Units
Combined filter-regulator and lubricator assemblies for pneumatic air preparation.
| Listed model | Connection |
|---|---|
| TC2010-02U | G 1/4 |
| TC4010-04 | G 1/2 |
| TC5010-06 | G 3/4 |
| TC5010-10 | G 1 |
Use the lubricator only where the downstream equipment requires oil lubrication. Confirm the bowl protection and drainage arrangement for the supplied unit.
Technical drawing and model data: page 1 of the shared air preparation catalogue.
TW Filter Regulators
Combined filtration, separation of liquid condensate and pressure regulation.
| Listed model | Connection |
|---|---|
| TW2000-02D | G 1/4 |
| TW4000-04D | G 1/2 |
| TW4000-06D | G 3/4 |
| TW5000-10D | G 1 |
The D suffix denotes automatic drain in this catalogue. Select the filtration grade and flow capacity for the application; a filter-regulator does not replace an air dryer.
Technical drawing and model data: page 3 of the shared air preparation catalogue.
TF Air Filters
Air-line filters for separating particles and liquid condensate, with standard and automatic-drain variants.
| Listed model | Connection |
|---|---|
| TF2000-02 / TF2000-02D | G 1/4 |
| TF3000-02D | G 1/4 |
| TF4000-04 / TF4000-04D | G 1/2 |
| TF5000-06D | G 3/4 |
| TF5000-10 / TF5000-10D | G 1 |
Confirm filtration grade, operating flow, condensate load and the drain arrangement. The D suffix identifies the automatic-drain variant.
Technical drawing and model data: page 4–5 of the shared air preparation catalogue.
TL Air Lubricators
Lubricators for supplying oil to pneumatic equipment that requires lubrication.
| Listed model | Connection |
|---|---|
| TL2000-02 | G 1/4 |
| TL4000-04 | G 1/2 |
Use the oil specified by the downstream equipment manufacturer and check the minimum flow needed to operate the lubricator. Keep oil-free equipment on an appropriate air supply.
Technical drawing and model data: page 6 of the shared air preparation catalogue.
TAD Automatic Condensate Drains
Automatic drains for discharging collected liquid condensate from suitable points in a compressed-air system.
| Listed model | Connection |
|---|---|
| TAD402-02 | G 1/4 |
| TAD402-03 | G 3/8 |
| TAD402-04 | G 1/2 |
Confirm the operating pressure, inlet and discharge connections and installation orientation. The drain does not replace filtration or drying.
Technical drawing and model data: page 7 of the shared air preparation catalogue.
Air Preparation Technical Catalogue
Seven-page catalogue covering TC, TR, TW, TF, TL and TAD. Select the exact model and connection size; confirm the supplied-unit operating limits and dimensions.
Plastic Push-In Fittings
The illustrated catalogue covers straight, elbow, tee, branch and related push-in fitting arrangements. Specify tube outside diameter, thread size and standard, layout and operating conditions for selection.
APPLICATION BEFORE SPECIFICATION
Selection Starts with Your Application
Provide the required air quality, pressure, flow rate, connections and installation details, or send a specification and photographs of existing equipment.
Catalogue & Technical Documents
Review the model-specific technical information and installation requirements. Send a specification, drawing or existing model reference if you need help selecting equipment.
Discuss Your Application
Send your requirements or a photo of the existing equipment for technical assistance and a quotation.
Availability and lead time are confirmed for the requested model and quantity.